technical support

The bearing bears the full load of the machine, so good lubrication has a great relationship with the bearing life, which directly affects the service life and operation rate of the machine. Therefore, the lubricating oil injected must be clean and the seal must be good. The main oil filling of the machine (1) Rotating bearings (2) Roll bearings (3) All gears (4) Movable bearings, sliding planes.

2. Newly installed wheel hoop is prone to loosening and must be checked frequently.

3. Pay attention to whether the work of all parts of the machine is normal.

4. Pay attention to check the degree of wear and tear of easily worn parts, and pay attention to replacing worn parts at any time.

5. On the chassis plane of the movable device, dust and other objects should be released to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in serious accidents.

6. If the bearing oil temperature rises, it should be stopped immediately for inspection to eliminate the cause.

7. If there is an impact sound when the rotating gear is running, it should be stopped immediately for inspection and eliminated